Epson C82332 - Manual (Page 43)

Configuring the Ethernet Card in Auto
PrintServer/Remote Mode
When using the Ethernet Card-equipped printer in Auto
PrintServer/Remote mode, you need to configure it for both print
server and remote printer operation. For information on changing
the various print server and remote printer settings, see the
appropriate sections earlier in this chapter.
Before you configure the card, first make sure the host printer is
turned on and the interface is connected to the network. Then log
on to the selected file server with supervisor privileges and follow
these steps:
1. Run EPSON Net!.
2. Select the printer you wish to configure and click Open.
3. Click Edit to open the NetWare config dialog box.
4. Click the Auto PrintServer/Remote option button under
Operating Mode to select auto switching mode.
2-18 Installing on Novell NetWare