Audio-Technica ATH-S220BT Wireless On-Ear Headphones (White) - Manual (Page 12)

12
Connecting via Bluetooth
To connect the product to a Bluetooth device, the product needs to pair (register) with the device.
Pairing a Bluetooth device
Read the user manual for the Bluetooth device.
Place the Bluetooth device within 1 m (3.3') of the product to perform pairing correctly.
Wear the product to hear voice guidance during pairing.
1
Starting with the product turned off, turn it on.
The indicator lamp will light in white, and then flash in white.
2
Use your Bluetooth device to begin the pairing process and search for the product. When your
Bluetooth device finds the product, “ATH-S220BT” will be displayed on the device.
For information about using your Bluetooth device, refer to the device’s user manual.
3
Select “ATH-S220BT” to pair the product and your Bluetooth device.
Some devices may ask for a passkey. In this case, enter “0000”. The passkey may also be called a passcode,
PIN code, PIN number, or password.
Bluetooth ON
ATH-S220BT
The voice guidance will play the message “Bluetooth connected”, and the indicator lamp will flash
slowly in white. This indicates pairing was successfully completed.
Pairing with Fast Pair
In one touch, the product enables quick, effortless Bluetooth pairing with your Android devices. You can even check to
see where you last placed it.