JLab Audio Studio Pro Wireless Over-Ear Headphones - Manual

STUDIO PRO WIRELESS HEADPHONES
FIRST TIME SETUP: BLUETOOTH PAIRING
Notes:
• Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphone and the connected device.
The headphone is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.).
• Once successfully connected, the headphone will memorize your device and automatically pair when turned on in the future.
Only one device may be connected at a time. To pair a different device, first unpair the current one through its Bluetooth settings.
• If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.
Select “JLab Studio Pro” in your
device settings to connect.
When the headphones
are paired, voice prompts
“You are connected” and
blue light will flash slowly.
3 2
Turn on the Bluetooth
in your device settings.
1
When the Studio Pro Wireless
Headphones are powered off,
press and hold the Power Button
for approximately 8 seconds.
Fast blinking red
and blue light indicates
searching for Bluetooth
device.
PAIRING NEW / ADDITIONAL DEVICES:
Turn OFF Bluetooth on your previously paired device and turn ON Bluetooth on new device.
Repeat FIRST TIME STEUP process for new devices.
LI
M
ITE
D TWO YE
AR
C
U
ST
OM
ER SU
PP
O
R
T
U.S
. BASED
We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab Audio
authorization and at our sole discretion. Retain your
proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at [email protected]
or visit jlabaudio.com/contact
REGISTER TODAY
jlabaudio.com/register
Product updates | How-to tips
FAQs & more
Bluetooth
Settings
Bluetooth
Settings
JLab Studio Pro