Kopul XLR Twist-360 Angled XLR Adapter - Manual

The male and female connectors can both be
rotated to four preset angles: up, down, left,
and right.
1.
2.
3.
Rotate either connector by following
these steps:
XLRTWIST-360
Use a small Phillips
screwdriver to
remove the screw
closer to the
elbow.
Gently pull the
connector from the
housing and rotate
it to the preset
holes at 90°,
180°, or 270°.
Then press the
connector back
into the adapter.
Replace and
tighten the screw.