Platinum Tools TDG310K1C Digital Tone and Probe Kit - Manual (Page 3)

4 5
FEATURES AND BENEFITS
GENERAL WARNINGS
•
This product is intended for use in compliance with the local electrical
safety rules and should not be used where electrical sparks may be
exposed to flammable or explosive gases (gas stations, hospitals, etc.).
•
Use this product within operating temperature specifications.
•
This product is only intended for low voltage testing up to 60 Volts.
Do not use this instrument for high voltage circuits. Doing so may damage
the instrument or cause injury or death.
The TDG310 Digital Tone and Probe Kit allows tracing and locating of single
cables or bundles that are connected to unpowered or active networks such
as phone lines, network cables or coax cables. The built-in test functions
can verify proper network termination or test for shorts in the single-ended
test mode. The tone generator can also determine the status modes of
analog telephone lines.
•
To retain functional integrity, keep this product dry and do not store it in
humid environments when not in use.
•
Remove batteries when not in use for extended periods to
prevent corrosion.
• Do not expose the contacts of the connectors to moisture or dust.
• Impacts, collisions and vibrations may cause damage to internal
components during transportation or use.
• Avoid disassembling the instrument, as no component inside can be
repaired by the user.
• This instrument is not intended to be used in environments with strong
electromagnetic interference.
SAFETY INFORMATION
Features
•
Trace and locate cables in unpowered or live circuits.
•
Includes audible and visual strength indicators.
• Built-in testing capacity for RJ45 termination.
• Equipped to test PoE ports for power and speed configurations.
• Checks status of analog phone lines.
• Comes with a built-in high-intensity flashlight.
Benefits
•
Digital tone generation and detection rejects extraneous analog noise
to locate cables quickly and easily.
•
Trace and test cables in the same interface.
• Identify cable types, including 2-pair or 4-pair, straight, cross or other.
• Cable scan and continuity testing for UTP, STP, RJ45, and RJ11 cables.
• Identify the status in the working telephone line: standby, ringing
or off-hook.
• Quickly detect the near-end, mid-end and far-end cable faults.
• The RJ45 port withstands a maximum voltage of 60VDC and the wire can
be traced directly to a powered PoE port.
• Perform continuity tests on shielded cable and shielding layers.
•
PD powered detection detects whether the power output of the PoE switch
is normal and detects the pins used for the power supply.
•
Switch between Audible or Silent mode.
•
Work in the dark with the built-in high-intensity LED flashlight.