Quantum Instruments OmOM3 TTL Flash and Auto-Tracking Video Light - Manual

Omicron3 Flash/Video Ring Light – OM3
Flash / Video Operation
●TTL or Manual flash controlled by CoPilot
● Video light for cameras with video capture
1.0 Introduction
Omicron3 Flash/Video Ring Light provides both flash and continuous video
lighting for ideal illumination. Designed specifically for 35mm SLR type still and
video cameras, it is also adaptable to other camera types.
Omicron3‘s “chromatically correct” light spectrum emanates from 80 critically
color-balanced LEDs. Colored LEDs mixed with white LEDs fill in the spectral
gaps characteristic of white-only LED lights.
Omicron3 interfaces with Quantum CoPliot full coordination with Nikon or Canon
camera systems, in TTL or manual modes.
Important : The firmware updates below may be required for Flash / Video
Simultaneous Operation:
CoPilot:
Canon cameras
CoPilot QF91C Version 1.06 or later, no update required.
Nikon cameras
CoPilot QF91N Version 1.06 or later, no update required.
Visit
www.qtm.com to download the latest CoPilot firmware and click Support,
Updates and Conversions
2.0 Overview
The Quantum Omicron 3 (OM3) Flash/Video Ring Light for flash/video operation
consists of:
OM3 - Ring Light with removable lens for holding color gels
CQ2 - Flash cable for connecting OM3 to Quantum Turbo battery pack.
OM3 can be powered by all Quantum Turbo batteries.
CQ8, CCQ8 cables may also be used with OM3
FW20 - Sync Cord manual flash trigger from camera.
FW31 - Din cable for connecting to Quantum CoPilot QF91 for TTL/Man
Operation.
!! WARNING -- DANGEROUS HIGH VOLTAGE !!
The Omicron Flash/Video Ring light contains dangerous high
voltages within. For professional use only. Do not disassemble
this equipment. In the event of physical damage immediately
disconnect power and return the unit to Quantum for repair.