TOA Electronics U-13R - Unbalanced Line Input Module with High/Low Cut Filters and Mute-Receive for 900 Series (Dual RCA) - Manual (Page 27)

E-07
• Optimized Equalization Curve For TOA Speakers
(see chart).
• Connects Between 900MK2 Mixer/Amplifier's "Pre-
Out" And "Power-In" Jacks or Between Separate
Mixer and Amplifier (E-03R – E-06R).
• Includes Dual RCA Cable.
• Unbalanced Input and Output (see Figure 1).
• Connector: dual RCA jack, removable terminal block (E-07S).
Connection Methods:
A-903MK2, A-906MK2, A-912MK2 Mixer/Amplifiers
• Connect the "Pre-amp Out" jack to the E module's "In"
jack and the E module's "Out" jack to the "Power Amp
In" jack (Figure 2).
M-900MK2 Mixer/Pre-amplifier
• Connect the "Aux. Output" jack to the E module's "In"
jack and the E module's "Out" jack to the input of an
adjacent power amplifier such as the TOA P-900MK2
Series (Figure 3).
P-906MK2, P-912MK2, P-924MK2 Power Amplifiers
• Connect the mixer output to the E module's "In" jack
and the "Out" jack to the amplifier's "Direct Input" screw
terminals (Figure 4).
• Note: Since the E module's jacks are unbalanced, install
external devices adjacent to the module. If the device is
located further than 15 feet, convert all inputs and
outputs to balanced with appropriate transformers
(available from other vendors).
E-03R
E-04R
E-05R
E-06R
E-03R, E-04R, E-05R, E-06R
E-07S
CONNECTOR DIAGRAM
Input Impedance 100 kohms, unbalanced
Output Impedance 1 kohms, unbalanced
Sensitivity +2.2 dBu
Output Level +2.2 dBu
Noise (S/N) 86 dB
SPECIFICATIONS (E-03R – E-06R)
BLOCK DIAGRAM
E-03
E-04
E-05
E-06
E-07
E Series Processor Modules for TOA Speakers
SPECIAL FUNCTION MODULES: SPEAKER PROCESSOR PAGE 28
Modules & Corresponding Speakers
Module: Speaker:
E-03R F-122CU/CU2
E-04R H-1
E-05R H-2/H-2WP
E-06R H-3/H-3WP
E-07S FB-100/HB-1
E-07S
E-03
E-04
E-05
E-06