Displaying an image when no signal is detected – Christie Access Series II UHD752-L 75" UHD 4K Commercial Monitor User Manual
Page 26
Access II Series LCD Panel User Guide
020-001836-01 Rev.1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
26
Playing content on the display panels
3.
Enable the
AutoPlay
option.
4.
To exit the menu, on the remote, press
Menu
.
Displaying an image when no signal is detected
Set the behavior of the display panel when no signal is detected from the selected input source.
1.
In the display panel menu, select
Signage Settings
>
No Signal
.
2.
To set the display panel to check the connected USB devices for available files to play, select
Failover
.
If no playable files are available or
a
USB device is not connected
to the display panel, the No
Signal image is displayed and the display panel turns off after five minutes.
If the No Signal image is not available, the message "No Signal OSD" is displayed on the
screen, and the display panel turns off after five minutes.