Power Vision PowerEgg X Explorer AI Camera & Drone User Manual
Page 13
11
EN
*
You can connect your mobile device to the AI-Camera over a Wi-Fi network or an approved data cable. For details, please read
on-screen instructions in the App or watch the related tutorials.
*
More functions will become available in the future via updates. For more information, please refer to the instructions contained
in the App.
2. Get Ready to Shoot
Short press once and then press and
hold the power button for 2s to start
the PowerEgg X’s gimbal camera.
Run the Vision+ 2 App and connect the
gimbal to PowerEgg X following on-screen
instructions.
SSID: EggX_xxxxxx
Password:12345678
3. Shoot with the AI-Camera Functions
For details, please visit PowerVision's official website www.powervision.me and download the user manual. The content is subject to change without further notice.
PowerEgg and PowerVision are Trademarks owned by Powervision Tech Inc.
Hyperlapse
Slow-motion
*