Click the receive button in your e-mail program, Keyboard, The keyboard does not work – eMachines 13 User Manual

Page 69: Remove all extension cables and switch boxes, Make sure that nothing is resting on the keyboard, Liquid spilled in the keyboard

Advertising
background image

63

www.eMachines.com

Troubleshooting

People are sending you e-mail messages, but you have not received any mail

Click the receive button in your e-mail program.

Make sure that your account with your Internet service provider (ISP) is set up
correctly. Contact your ISP for technical support.

Keyboard

The keyboard does not work

Make sure that the keyboard cable is plugged in correctly. For more information, see
the poster that came with your computer.

Remove all extension cables and switch boxes.

Clean the keyboard by using an aerosol can of air with a narrow, straw-like extension
to remove dust and lint trapped under the keys.

Try a keyboard that you know works to make sure that the keyboard port works.

Reinstall the keyboard device driver.

A keyboard character keeps repeating or you see a “keyboard stuck” or “key failure”
error message

Make sure that nothing is resting on the keyboard.

Make sure that a key is not stuck. Press each key to loosen a key that might be stuck,
then restart your computer.

Liquid spilled in the keyboard

If you spilled liquid in the keyboard, turn off your computer and unplug the keyboard.
Clean the keyboard and turn it upside down to drain it. Let the keyboard dry before using
it again. If the keyboard does not work after it dries, you may need to replace it.

Advertising