Datavideo SE-1200MU 6-Input Switcher and RMC-260 Controller Bundle - Manual (Page 43)

43
6.5 DSK TRANS Panel (Windows & MAC Users)
This panel is used to turn only the DownStream Keyers on or off. This can be done to
show the chosen keyer in the Preview video output for configuration before live on-air
use.
The labelled DSK 1 (Pgm/Pvw) or DSK 2 (Pgm/Pvw) buttons can be off or on. When a
selected DSK button is green it is on and the active DSK result is seen in the multi view
Preview video image.
Each DSK button has an LED above it. This LED can also be off or on (Green). When the
selected DSK LED is on the active DSK settings are seen in the multi view Program video
image and at the Program outputs.
With the selected DSK already active in the Preview output press either the Cut or Auto button. Using the
Cut button will apply the current DSK settings to the live Program output immediately. Using the Auto
button will bring in the current DSK with a gentle mix or fade type transition. If the DSK LED is on the
program or preview outputs, clicking the AUTO button again will cancel the DSK with a fade out or mix
transition.
To understand the DSK function, try the example set up with DSK 1 in Section 7.1 , the subsequent chapter.