Elmo P100 - Manual (Page 19)

Infrared sensor
30
°
30
°
30
°
30
°
30
°
30
°
30
°
30
°
68
PART NAMES
AND
FUNCTIONS
ENGLISH
■ Receivable Range
Point the infrared emitting part of the wireless remote control at the infrared sensor of the main unit, and
press the button for desired function.
The receiving range may be reduced when the main unit is placed in direct sunlight, near an inverter
fluorescent lamp or in any other unfavorable surroundings.
Depending on the conditions of fluorescent lamps, etc., the sensor may fail to receive the infrared light. In
such case, relocate the main unit, or take other countermeasures.
• Receivable range
Distance: Approx. 7m (23ft) or less from the front of the infrared sensor
Angle:
Approx. 30° or less to the rightward, leftward, upward and downward,
respectively, from the infrared sensor
■ Battery Change
Remove the battery case cover on the rear side by pressing down the [ OPEN] mark part in
the direction as indicated by the arrow.
Install 2 batteries (Type R03, AAA) in the battery case in the direction as indicated.
Install the batteries with the correct polarity.
Although the battery life depends on the operating conditions and battery type, the batteries are
recommended to be changed once a year.
The supplied batteries are only for use in initially confirming the operation of this product. Therefore, it is
not guaranteed that these batteries remain alive for the validated period.
Within 7m (23ft)
Wireless remote
control housing case
The infrared sensor is also built in
the wireless remote control housing
case, so that the wireless remote
control can be operated while it is
housed in the case.