Connecting a power amp, Before connecting a power amp, P. 43) – Marantz AV 10 Reference 15.4-Channel Home Theater Preamplifier/Processor User Manual
Page 43
Connecting a power amp
Before connecting a power amp
0
Connect a power amp (sold separately) to the PRE OUT connector of
this unit.
0
This unit has UNBALANCED RCA PRE OUT connector and
BALANCED XLR PRE OUT connector. Connect to the correct
connector for your power amp. If your power amp has both connectors,
connect to either of them.
0
Connect the speakers to the power amp.
0
For details on speaker connections, see the Owner's Manual for the
power amp.
0
This section shows how to make a 15.1-channel connection.
For how to make other speaker connections, see page 48.
G
AV 10 BALANCED XLR PRE OUT connector PIN arrangement
H
1 2
3
A
GND (Ground)
B
HOT (+)
C
COLD (–)
The PIN arrangement in this unit uses the European method.
In the USA method,
B
is COLD, and
C
is HOT.
When connecting a device that utilizes the USA type of PIN arrangement,
replace the
B
and
C
plugs on one side of the balanced cable.
NOTE
0
Do not short the HOT and GND or COLD and GND for use.
0
Disconnect this unit’s power plug from the power outlet before connecting the
speakers.
Also, turn off the power amp and subwoofer.
43