Switching on the dual cooking zone, Residual heat indicators – Electrolux pmn User Manual
Page 10
Operating Instructions
30
Switching on the Dual Cooking Zone
1
The switch for the dual cooking zone is switched on by turning clock-
wise and must not be turned past the stop!
0
1. Turn the switch for the dual cooking zone clockwise.
Turn past position 9 through light resistance at the
symbol, to a clearly noticeable stop.
2. Then turn back to the required heat setting for
cooking.
3. To stop cooking, turn back to the off position.
3
The next time the dual cooking zone is required,
repeat the above procedure.
Residual Heat Indicators
An indicator is assigned to each cooking zone. This illumi-
nates when the temperature of the cooking zone reaches
80° C
1
Important! As long as the residual heat indicator is illu-
minated, there is a risk of burns.
Even when the cooking zone is switched off, the corresponding indica-
tor will remain on until the temperature falls below 80° C.
2
You can use the residual heat for melting and for keeping food warm.
1
2
3
4
5
6
7
8
9
0