Electrolux EWF 14981 W - Manual (Page 16)

16 electrolux use
Extra Rinse: this option can be
selected with all programmes except
the Wool, Handwash, Silk programmes
and Miniprogramme. The machine
performs some additional rinses.
This option is recommended for people
who are allergic to detergents, and in
areas where the water is very soft.
Stain: select this button if you wish
to add to the washing of heavy soiled
laundry a stain phase: at the
temperature of 40°C the special
detergent for stains is loaded from the
compartment marked
.
This function is available in cotton,
synthetic and delicate programmes with
a temperature of 40° or higher.
The washing time will be prolonged by
few minutes.
The «Prewash» and the «Stain» options
cannot be selected together.
Half Load: select this option to
reduce water consumption on the rinse
cycle when washing ONLY a smaller
load of cottons or linens (maximum load
size = 3,5 kg).
The machine performs the rinses with
less water.
End Time (Delay Start): this
option makes it possible to delay the
starting of the washing program by 30
min - 60 min - 90 min, 2 hours and then
by 1 hour till 20 hours. The delay you
have selected is indicated on the
display. The end time will increase in
order to show you the selected delay.
You must select this option after you
have set the programme and before you
press the Start/Pause button.
If you wish to add laundry in the
machine during the delay time you will
press Start/Pause button to put the
machine in pause.
Add the laundry, close the door and
press Start/Pause button again.
You can cancel the delay time at any
moment, before you press the
Start/Pause button.
Selecting the delayed start.
• By pressing Up or Down
button you can move through the
options menu till you locate «End
Time».
• Press Ok button to activate this option
(the visualized time starts to flash).
• By pressing Up or Down
button you can increase or decrease
the delay time.
• Press Ok button to confirm your delay.
• Press «Temp.» or «Spin» button to
return the display to the default status.
• Press the Start/Pause button to start
the programme. The programme will
start after the selected delay has
expired.
Temp Spin
Ok Options Start/Pause
Time End Time
Settings
Child Lock
23:00
1 2
Temp Spin Ok Options Start/Pause
Time End Time
Settings
Child Lock
1
2
21:30
132978151 EN.qxd 04/12/2006 16:05 Pagina 16