Eagle Tree Systems Seagull Glide - Manual (Page 20)

Copyright © 2003-2005 Eagle Tree Systems, LLC
Page 20
Eagle Tree Systems SEA-01 (900 MHz, 200mW System)
Contains FCC ID: OUR-9XTEND (900 MHz, 1 Watt System)
Contains FCC ID: OUR-XBEEPRO (2.4 GHz System)
Tested to Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC Radiation Exposure Statement Regarding the FCC Certified 900 MHz and 2.4 GHz
Transmitters
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be
operated with minimum distance of 20cm between the radiator and your body.
The Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Caution
Any changes or modifications not expressly approved by the party responsible could void the user’s authority to operate this
equipment.
Radio Interference and FCC Information
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Specifications
FCC 900 MHz, 200mW Transmitter
Frequency Range:
902 – 928 MHz
Operating Range (Line of Sight): up to 1.2 miles w/included antenna, up to 3.6 miles with RX Yagi
FCC Approval: 15.247 Frequency Hopping Spread Spectrum
Maximum Output Power: approx 200 mWatt
Dimensions: approx 2-3/4” x 1-1/4” x ¼”
Weight: approx 0.5 oz (Transmitter only)
Temperature Range: 0 – 140 degrees F
TX Antenna: Thin, flexible stainless whip
Power: Power taken from Recorder/Receiver battery
Current Draw: Transmitter + Recorder, average < 70 milliamp
FCC 900 MHz, 1 Watt Transmitter
Frequency Range:
902 – 928 MHz
Operating Range (Line of Sight): Up to 14 miles (22 km) w/ included antenna, up to 40 miles with RX Yagi
FCC Approval: 15.247 Frequency Hopping Spread Spectrum
Maximum Output Power: approx 1 Watt
Dimensions: approx 1.44” x 2.38” x 0.20” (3.65 cm x 6.05 cm x 0.51 cm)
Weight: approx 0.8 oz (Transmitter only)