Five, Connecting the evolution 222 to your system, Input and output connections – Evolution Technologies 222 User Manual
Page 26
26
SECTION
FIVE
Connecting the Evolution 222
to Your System
This section describes Evolution 222 preamplifier connections.
Input and Output Connections
Krell recommends using its proprietary Krell CAST system for unparalleled sonic
performance for connections between the Evolution 222 preamplifier and other
CAST-equipped components. Krell CAST uses flexible interconnecting cables that
can be drawn through tight spaces and concealed.
The Evolution 222 also offers balanced operation. The circuitry and connections
associated with balanced operation not only can minimize sonic loss but also are
immune to induced noise, especially for installations using long cables.
XLR Pin Configuration
Pin 1
Ground
Pin 2
Non-inverting (0
O
)
Pin 3
Inverting (180
O
)
Inputs and outputs are located on the Evolution 222 back panel. Maintain the
correct left/right orientation, when hooking up your system.