Exide Technologies DEC200 - Manual (Page 13)

Sales
• Service • Recycling 1-888-563-6300
12
11 MAINTENANCE
The charger requires minimum maintenance. ENSURE THE CHASSIS IS SECURELY
GROUNDED per the local/federal Electrical Code. Do not allow excessive dust to
accumulate on the components inside. Blow out with clean compressed air when
necessary. The chargers are designed with a breaker and fuse for the AC input and DC
output respectively. Should this fuse fail or breaker trip, the cause must be determined
before they are corrected or replaced. Never replace the fuse or breaker with one of a
higher capacity than the one originally fitted.