Built in 3 way control switch, Remove screen from mounting brackets – Elite Screens PowerMax User Manual
Page 9
Rev.123011-AS
www.elitescreens.com
Built in 3 Way Control Switch
1.
The PowerMax Series comes with a 3 Way Control Switch attached to the Power Cord, which is 3.5
meters in length.
2.
Use the provided Bubble Level (f) to ensure the screen is level before plugging in the power cord.
3 Way Control
Up/Stop/Down
Switch
Remove Screen from Mounting Brackets
1.
Pull down on the Mounting Bracket Release Tab and remove the bottom of the case first, away
from the wall/ceiling, followed by the top of the case.
Release Tab
Built in 3 Way Control Switch
omes with a 3 Way Control Switch attached to the Power Cord, which is 3.5
Bubble Level (f) to ensure the screen is level before plugging in the power cord.
Bubble Level (f)
from Mounting Brackets
Bracket Release Tab and remove the bottom of the case first, away
, followed by the top of the case.
Pull Bottom of case first away from wall/ceiling.
9
omes with a 3 Way Control Switch attached to the Power Cord, which is 3.5
Bubble Level (f) to ensure the screen is level before plugging in the power cord.
Bracket Release Tab and remove the bottom of the case first, away
Pull Bottom of case first away from wall/ceiling.