Enterasys Networks 2200 - Manual (Page 140)

Priority Classification Configuration Screen
6-22 802.1 Configuration Menu Screens
6.7 PRIORITY CLASSIFICATION CONFIGURATION SCREEN
When to Use
To perform the following functions:
• Display the current Priority, Classification, and Description entries of each classification rule.
• Assign priorities according to Classification Rules.
• Add/delete a priority and associated protocol entry.
• Access the Protocol Port Configuration screen.
• Assign an 8-bit TOS (also known as DF) value to incoming IP frames. For more information on
the IP TOS Function, refer to Section 6.7.2 .
• Write over an existing TOS value.
When a frame is received that already contains an 802.1Q frame tag, frame classification is not
implemented. Instead, the frame is processed by the SmartSwitch device according to the
information contained in the 802.1Q frame tag.
How to Access
Use the arrow keys to highlight the PRIORITY CLASSIFICATION CONFIGURATION menu
item on the 802.1 Priority Configuration Menu screen and press ENTER. The Priority
Classification Configuration
screen, Figure 6-7 , displays.
NOTE: The Priority Classification Configuration screen does not display when the
operational mode of the device is set to SECURE FAST VLAN.
Section 4.2.9 provides instructions for setting the operational mode.