6italiano polski español francais deutsch english – LD Systems U305.1 IEM Wireless In-Ear Monitoring System with Earphones (514 to 542 MHz) User Manual

Page 6

Advertising
background image

6

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCH

ENGLISH

14

12

15

13

8

CABLE STRAIN RELIEF

Use the strain relief for the flexible cable of the power adapter to protect the transmitter’s low-voltage connector and the power adapter’s low-volt-

age plug from unintentional damage and to avoid pulling out the connector inadvertently.

9

AF INPUT LEFT / RIGHT

XLR/6.3 mm jack combination socket for the left and right input channel (XLR = symmetric, jack = asymmetric).

10

ANTENNA

BNC connector for the provided transmitter antenna.

11

TRANSMITTER ANTENNA

Transmitter antenna with BNC connector.

16

17 18

19

12

DISPLAY

Illuminated DC display with dual functions. When switched on, the display illuminates

for several seconds and shows the channel number currently set. If the batteries have

low power, the display begins to flash red.

13

CHANNEL + / -

Switch to select radio channels 1 to 12. Press and hold one of the two buttons for

approx. 2 seconds in order to change the setting. The currently set channel

number will begin to flash and you can select the desired radio channel using the +

and - buttons. The flashing stops after approx. 5 seconds, the display illumination goes

out, and the selected radio channel is activated. In order to establish a radio connec-

tion between the transmitter and receiver, the channel number or radio frequency of

both devices must match.

14

ANTENNA

Antenna of the pocket receiver. For optimal reception, do not obscure or bend.

15

BATTERY COMPARTMENT

To replace the batteries, open the battery compartment of the

pocket receiver by simultaneously pressing on the markings on both sides of the battery

compartment cover and open the cover towards the front. Remove the used batteries

and insert fresh batteries (2x AA/LR6, alkaline) as depicted in the battery compartment.

Now fold the battery compartment cover back onto the housing until the lid clicks into

place. Do not use the receiver for extended periods of time, and please remove the

batteries in order to prevent damage to the receiver due to leaky batteries.

Advertising