Select the wash time – Emerald Innovations EW-2500MG User Manual

Page 9

Advertising
background image

7

The capacity of washing of the machinerefer to the
largest weight of the standard laundries under dry
condition that can be washed in one time. Laundries
quantity in one washing cycle shall be lower than
the rated capacity.

The thickness ,size , type of the cloth will influence the
actual washing capacity. It is suitable to put in reasonable
amount of laundries and the laundries can be turnedround
in washing for one time washing.

How to use the washing powder

How to use the whitener

Fill water to decided level. Dilute the whitener with container. Pour it slowly into the
washing tub.
Avoid using whitener on laundries with color or pattern as they are prone to lose color.
The whitener shall not touch the laundries directly.

Direct dissolved in the machine:
1.Fill small quantity of water.
2.Add the powder . Run for 30 seconds to
dissolve it completely.
3.Put it in the laundries. Select suitable
water level.
The instant dissolving of the washing powder:
1.Prepare warm water of 30 C and a container.
2.Add the powder while stirring to fully
dissolve it.

The powder is more prone to pollute the
laundries than the detergent. Therefore
please use it with proper quantity.

It is suggested not to use high sudsing
detergent.

Dosage of different washing powder is
different. Please refer to the instruction
of the washing powder for the detail
dosage.

Refer to the user's manual for the usage and quantity of the whitener.
For powder whitener,please dissolve it before using.

Usage of the detergent

The musts in washing

Finish washing

The pulsator stops rotating. Put down the drain hose
to discharge the water.

Select the wash time

Please select wash time according to the laundries.

Laundries

Wash time

minutes

Knitwear/chemical fiber

Cotton,blending,linen

Very dirty and thick laundries

Silk(thin laundries)

About2 4

~

About3~6

About7~13

About8~10

About10~15

Wash timer

OFF

(To set to below 2 minute,

first set to 6 minute then

turn it back. it can increase

the service life of the timer).

Advertising