LEICA 10x42 Geovid R Binocular/Rangefinder (Yards) - Manual (Page 48)

46
DISpLAYING AND CHECKING THE SET
BALLISTICS pARAMETERS
If you want to check your settings, you can display the
values at any time.
To do this, briefly press the secondary / menu button
(8) twice.
• The following information briefly appears in turn
below the reticule (instead of the range) for approx.
2s:
– The set ballistics curve (see p. 41)
– The set zeroing distance (see p. 42)
– The set ballistic output value (see p. 45)
If all ballistics functions are deactivated (
bALL
= OFF),
only the US or EU setting is displayed.
USING ALTERNATIVE BALLISTICS CURVES
If the intended weapon / ammunition combination is
not covered by one of the 2 x 12 programmed
ballistics curves on the Leica Geovid HD-B you can
use your own custom ballistics curves. These are
initially precisely calculated based on the load data
your provide online - such as caliber, ammunition
weight etc. - and then transferred to the microSD
memory card supplied so that it can be retrieved on
the binoculars once the card has been inserted.
This is done in three stages:
A. Calculation and transfer of requested ballistics
curve to the memory card.
On the Leica Camera AG homepage at www.
leica-camera.com, the Sport Optics area
– includes instructions for entering the required
information/values for calculation of a ballistics
curve
– the corresponding input screen
– a description of the download process,i.e. how to
transfer the calculated ballistics curve to the
memory card