Element Electronics FLX-3210 - Manual (Page 21)

ENGLISH
19
Chapter 2 Installing the LCD TV
Press the button on the remote to turn on the LCD TV.
Main
TV(CABLE/AIR)
VIDEO1 (SIDE)
VIDEO2 (REAR)
VIDEO3 (S-VIDEO)
VIDEO4 (YPbPr1)
VIDEO5 (YPbPr2)
VIDEO6 (HDMI)
COMPUTER(VGA)
Press the OK button to display the received channel list, then press ▲▼ to select a
channel. Or, use the ▪ (Input button) with 0-9 buttons to select digital channel( for
example 9.1)
The digital main channel might include many subchannels (for example 9-1, 9-
2..) that are showing program at the same time.
The Channel Scanning will create a list of receivable channels for the current
input (antenna or cable). You will be required to run Channel Scanning for each
RF input to create a list of available channels from both inputs.
TV Select Exit
Channel Scan
Tuner Mode Cable
Channel Skip
Time Zone Eastern Time
Press the INPUT button on the remote to display the Input List. Use the ▲▼ buttons to
select TV and press the OK button.
Press the MENU button on the remote control to display the Main menu, and use the ◄►
buttons to select the TV.
Status: Scanning..... Cable
Analog Channels: 25
Digital Channels: 0
47%
Channel List
5-2 RF5-2
9-1 KQED-HD
9-2 KOED-SD
8 CCT
12
13
15