Installation, Hardware installation – Emprex DVD Writer 18X User Manual
Page 8
Advertising
INSTALLATION
Hardware Installation
To connect this drive to your PC, you will need one SATA port for the
SATA drive.
1. With the power to your PC disconnected, remove the PC’s top cover.
2. Insert the drive into one of the free 5¼" bays available for disk drives
and secure it with screws to your PC.
3. Connect the 7-pin Signal & 15-pin Power Segment Key cable from
your hard disk to the back of the DVD Writer drive.
4. Reinstall the casing on your PC, and reconnect the power supply.
Advertising