Extron electronic MVX 44 series - Manual (Page 74)

Specifications and Part Numbers, cont’d
MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Specifications and Part Numbers A-4
Audio output
Output gain .................................. 0 dB unbalanced (Consumer) or +12 dB balanced (Pro), selectable;
default = +12 dB, balanced, when output level is set to “Pro”
Number/signal type
MVX 44/84 VGA A ......... 4 stereo, balanced/unbalanced
MVX 48/88 VGA A ......... 8 stereo, balanced/unbalanced
Connectors
MVX 44/84 VGA A ......... (4) 3.5 mm captive screw connectors, 5 pole
MVX 48/88 VGA A ......... (8) 3.5 mm captive screw connectors, 5 pole
Impedance .................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ...................................... ±0.1 dB channel to channel
Nominal level ............................... +4 dBu (1.23 V) (default) balanced (Pro), or
-10 dBV (316 mV) unbalanced (Consumer), selectable
Maximum level (Hi-Z) ................ >+22 dBu, balanced; >+14 dBV, unbalanced at 1%THD+N at default settings
Maximum level (600 ohm) ......... >+20 dBu, balanced; >+12 dBV unbalanced at 1%THD+N at default settings
Control/remote — switcher
Serial control port ........................ RS-232, 9-pin female D connector
Baud rate and protocol ............... 9600, 8-bit, 1 stop bit, no parity
Control pin configurations ......... 2 = TX, 3 = RX, 5 = GND, 9 = hardwired IR input
IR controller module ................... IR 501 (optional remote control)
Program control ........................... Extron’s control/configuration program for Windows
®
Extron’s Simple Instruction Set (SIS ™ )
General
Power ............................................. 100 VAC to 240 VAC, 50/60 Hz, 30 watts, internal, autoswitchable
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, noncondensing
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, noncondensing
Rack mount ................................... Yes, with included brackets, part #70-077-03, or furniture mountable with an
optional under-desk mounting bracket, part #70-222-01.
Enclosure type .............................. Metal
Enclosure dimensions ................. 1.75" H x 17.4" W x 8.5" D (1U high, full rack wide)
4.4 cm H x 44.2 cm W x 21.6 cm D
(Depth excludes connectors and knobs. Width excludes rack ears.)
Product weight ............................. 7.0 lbs (3.2 kg)
Shipping weight ........................... 10 lbs (5 kg)
Vibration ....................................... ISTA 1A in carton (International Safe Transit Association)
Listings .......................................... UL, CUL
Compliances ................................. CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
All nominal levels are at ±10%
Specifications are subject to change without notice.