Ecom Instruments Ex-GSM 01 EU - Manual (Page 29)

70
2. To display the nickname of the inviting party and the group address
(if it does not pertain to a private group), select
Show.
3. To add the group to your telephone, select Save.. To specify the status
of the group, select Standard, Monitor or Inactive. To decline the invitati
on, select End > Yes or Show > Delete > Yes.
7.8.5 PTT settings
There are two types of PTT settings: Settings for connecting to the service
and a setting for use.
You can obtain the settings for connecting to the service from your net-
work operator or provider. You can manually enter the settings.
To specify the settings for connecting to the service, select Menu > Push-
to-talk > Config. settings. Select one of the following options:
Configuration for selecting a provider, Standard or My configuration for
PTT service. The configurations which the PTT service supports will be
displayed.
Account, to select a PPT service account in the active configuration
settings.
PTT user name, Standard nickname, PTT password, Domain and Server
address
To edit the PTT setting for use, select Menu > Push-to-talk > PTT settings.
If you wish to allow the receipt of incoming individual calls, select Calls
between two > On. If you only want to place individual calls, but not
receive them, select Off. The provider may provide services that overwrite
these settings. To set the telephone so that you are first notified of inco-
ming individual calls by a ring tone, select
Notify.
To activate the monitored groups, select Monitored groups > On. To set
the telephone so that it automatically establishes the connection to the
PTT service when turned on, select
PTT Status when turning on > Yes.
To suppress disclosure of your PTT address in groups and individual
calls, select
Send my PTT address > No.