E&J TRAVELER SE 3E01-INS-LAB-REVB08 - Manual (Page 27)

3E01-INS-LAB-RevB08, December 008 • Traveler SE Owner’s Manual 7
check footrests & elevating legrests
Check footrests and legrests at least once a month. Inspect the locking
mechanisms to confirm sure fit. Check for cracks, burrs, or sharp edges,
and replace if found. Ensure that the footrest or legrest will automatically
lock securely in place and will not accidentally unlock. If equipped with
heel loops, ensure the anchor bolts are tight and secure.
cleaning your Traveler SE
Wipe off the frame frequently, at least once a week, using a soft cloth.
Dry the wheelchair immediately if exposed to moisture. Clean the frame
every three months with a mild soap and water solution. The frame
does not need to be waxed. Do not use solvents, abrasive waxes, caustic
chemicals or spray silicone. Never use abrasive cleansers; they could
scratch the finish. Never use steam or high pressure cleaners. Clean
upholstery and plastic components at least once a month with a mild soap
and water solution.
check casters
Check the caster stems for proper rotation at least every three months.
The caster fork must swivel freely to facilitate steering and handling.
Adjusting the stem nut varies the amount of force required to turn the
caster. If the nut is too loose, the caster will flutter or shimmy; if the nut
is too tight, the wheelchair will be difficult to steer. If the caster stem
requires adjustment, or the stem bearings require replacement, contact
your Graham-Field dealer. Ensure that stems are firmly attached to forks,
and that forks and stems are not bent. Evaluate all threads, locking nuts
and bearings.
check wheel bearings
Have your Graham-Field dealer check caster and rear wheel axle bearings
at least every six months.