Envision Peripherals L37W698 - Manual (Page 20)

16
BASIC OPERATION
To operate your LCD TV, you may use the TV remote control or top panel buttons to select input
source, change channels, or adjust volume.
Turning on the LCD TV
Before using the LCD TV:
1. Connect external equipment properly.
2. Insert the power plug and the power LED indicator will light red.
Power On/Off
T
o turn the LCD TV on/off :
Press POWER button under the LCD TV, or press the POWER button on your remote control to
turn on/off the TV. The power LED indicator lights blue when the LCD TV is on.
Select input source
To select the required input source:
Press the INPUT button on the remote control, Use
▲▼ to select the required input source
between TV, AV, S-Video, YPbPr 1, YPbPr 2, VGA, HDMI 1 and HDMI 2.
To confirm the selection, press ENTER.
Volume Adjusting
Press VOL +/- to adjust volume.
To turn off the volume, press MUTE.
To restore volume, press MUTE again, or press VOL +/- directly.
INFO
To display the current information of the LCD TV:
Press INFO, and the current state will be displayed on the screen. (It shows all or some of the
information about Input, Channel, Resolution, Audio Type, etc., depending on what input source it is
in.)