EdgeStar AP10002BL User Manual
Page 6
3
Parts Included
Preparations for installing the window kit
You must vent your portable air conditioner when running in it
cooling mode. Your unit includes a window exhaust kit that can be
used to vent the unit out a window.
Before you begin, make sure you have all the parts necessary for
installation.
If you have multiple windows, choose one that is near an electrical
outlet that will be able to provide sufficient power to your unit. See
the power requirements listed on the product label printed on the
side, or on the back of your portable air conditioner.
NOTE: You may need to
contact your electrician if
your room’s circuit is not able
to power your unit.
Suggested Tools- Phillips Screw Driver (Medium sized), Tape Measure/Ruler, Scissors,
Saw (In the event that your window panel needs to be cut down in size for installation).