Elektra Beckum SR 4900 L - Manual (Page 8)

8
ENGLISH
1. Components and Parts -
standard delivery ........................7
2. Please read first! .........................8
3. Safety ...........................................8
3.1 Specified Conditions of Use ..........8
3.2 General safety instructions............8
3.3 Symbols Used ...............................8
4. Operation .....................................9
4.1 Before initial operation ...............9
4.2 Using the Tool ...............................9
5. Care and maintenance................9
6. Available Accessories ................9
7. Repairs .........................................9
8. Environmental protection...........9
9. Technical specifications...........10
These instructions are written in a way to
let you work with the tool quickly and
safely. Here is how to use the instruc-
tions:
•
Read these instructions fully before
operating the tool. Pay special
attention to the safety information.
•
If you notice transport damage while
unpacking, notify your supplier
immediately. Do not operate the
tool!
•
These instructions are intended for
individuals having a basic technical
knowledge in the handling of tools
like the one described herein. If you
have no experience whatsoever with
such tool, we strongly recommend
to seek the advise of experienced
individuals.
•
Keep all documents supplied with
this tool for future reference. Also,
retain proof of purchase in case of a
warranty claim.
•
This tool must not be sold or lent to
someone else without being accom-
panied by these operating instruc-
tions and all other documents sup-
plied with the tool.
The manufacturer is not liable for any
damage arising from neglect of these
operating instructions.
Information in these instructions is
denoted as under:
Danger!
Risk of personal injury or
environmental damage.
Caution!
Risk of material damage.
Note:
Additional information.
−
Numbers in illustrations (1, 2, 3, ...)
−
indicate component parts;
−
are consecutively numbered;
−
Instructions to be carried out in a
certain sequence are numbered.
−
Instructions which can be carried
out in any order are indicated by a
bullet point (•).
−
Listings are indicated by a dash (–).
3.1 Specified Conditions of
Use
This tool is used for running, driving and
removing nuts and bolts.
This tool shall only be powered by an air
compressor. The max. permissible work-
ing pressure stated in the Technical
Specifications must not be exceeded.
This tool must not be operated with
gases that are explosive, combustible or
detrimental to health.
Any other use is not as specified. Use
not as specified, modification of the tool
or use of parts not approved by the man-
ufacturer can cause unforeseeable dam-
age!
3.2 General safety instruc-
tions
•
When using this air tool follow the
safety instructions given below, to
exclude the risk of personal injury or
material damage.
•
Please also observe the special
safety instructions in the respective
chapters.
•
Observe the statuary accident insur-
ance institution regulations and reg-
ulations for the prevention of acci-
dents pertaining to the operation of
air compressors and air tools, where
applicable.
•
This air tool shall only be used by
persons having read and under-
stood these instructions, and who
are aware of the dangers associated
with the use of such tool. Persons
under the age of 18 shall use this air
tool only in the course of their voca-
tional training, under supervision of
an instructor.
A
General hazards!
•
Keep your work area tidy – a messy
work area invites accidents.
•
Be alert. Do not operate this tool
while under the influence of drugs,
alcohol or medication.
•
Keep children and bystanders away
from the work area.
•
Store air tools out of the reach of
children.
•
Always use a quick coupler to con-
nect this air tool to a compressor.
•
Do not touch any rotating parts.
•
Disconnect this tool from air supply
before
−
changing sockets,
−
servicing or
−
when tool is left unattended.
A
Hazard generated by insuffi-
cient personal protection gear!
•
Wear personal protection gear:
−
ear protection,
−
protective spectacle.
A
Hazard generated by machine
defects!
•
Do not attempt to repair the tool
yourself! Only trained specialists are
permitted to service or repair com-
pressors, pressure vessels and air
tools.
A
Caution!
Protect the tool, air inlet, drive square,
and operating elements in particular,
from dust and dirt.
A
Danger by vibration!
•
Vibrations are tansmitted to the
entire body, particularly to arms and
hands. Very heavy vitrations may
cause nerve and vascular disorder.
A
Caution!
•
Protect the tool, air inlet and operat-
ing elements in particular, from dust
and dirt.
•
Make sure that the max. permissible
working pressure stated in the Tech-
nical Specifications is not exceeded.
The working pressure must be
adjusted by a pressure regulator.
•
Do not overload tool – use it only
within the performance range it was
designed for (see Technical Specifi-
cations).
•
Let tool run idle for a short time only.
3.3 Symbols Used
Danger!
Neglect of the following
warnings may cause seri-
ous injury or material
damage.
Table of Contents
2. Please read first!
3. Safety