Tascam Portacapture X6 32-Bit 6-Channel Multitrack Field Recorder User Manual
Linear pcm recorder
Advertising
Table of contents
Document Outline
- 1 - Introduction
- 2 - Names and functions of parts
- 3 - Preparation
- 4 - Connections
- 5 - Input and output settings
- 5 - 1 Using the INPUT SELECT function
- 5 - 2 Making input settings for each input
- Using the STEREO LINK function
- Setting recording input sources (INPUT)
- Using phantom power (phantom voltage)
- Adjusting the input level automatically (AUTO GAIN)
- Setting the low-cut filter (LOW CUT)
- Setting the noise gate (NOISE GATE)
- Setting the limiter (LIMITER/COMP)
- Setting the equalizer (EQ)
- Inverting the input phase (PHASE INVERT)
- Adjusting input gain (GAIN)
- Changing the input gain (GAIN)
- 5 - 3 Adding reverb to inputs (REVERB)
- 5 - 4 Setting the phantom power voltage
- 5 - 5 Setting plug-in power
- 6 - Recording apps
- 7 - Recording settings
- 7 - 1 Monitoring individual inputs (solo monitoring)
- 7 - 2 Changing the recording file format
- 7 - 3 Recording in mono
- 7 - 4 Pausing during recording (REC PAUSE)
- 7 - 5 Starting recording automatically (AUTO REC)
- 7 - 6 Recording with two settings at the same time (DUAL REC)
- 7 - 7 Capturing a few seconds before starting recording (PRE REC)
- 7 - 8 Adjusting input levels automatically (AUTO GAIN)
- 7 - 9 Recording file naming
- 7 - 10 Designating the folder use for recordings
- 7 - 11 Changing files while continuing to record (file incrementation function)
- 7 - 12 Punch in/out (MANUAL app only)
- 7 - 13 Recording times (in hours: minutes)
- 8 - Playing files
- 9 - File operations
- 9 - 1 File name overview
- 9 - 2 File and project structure overview
- 9 - 3 Folder hierarchy example
- 9 - 4 Project overview
- 9 - 5 Using the BROWSE screen
- 9 - 6 Folder operations
- 9 - 7 File and project operations
- File menu
- SELECT
- Playing master files(PLAY)
- Viewing file details (FILE INFORMATION)
- Deleting files and projects (FILE DELETE)
- Deleting tracks in projects (TRACK DELETE)
- Enabling and disabling protection (CHANGE PROTECT)
- Changing names (RENAME)
- Viewing the mark list (MARK)
- Dividing files (DIVIDE)
- Normalizing recordings (NORMALIZE)
- 9 - 8 Setting where recording files are saved
- 10 - Mark functions
- 11 - Camera functions
- 12 - USB connection
- 13 - Other functions and apps
- 14 - Controller app
- 15 - Various settings
- 15 - 1 Adjusting gain differences between built-in mics (mic trim function)
- 15 - 2 XRI function overview
- 15 - 3 Showing various information
- 15 - 4 Resetting the date and time
- 15 - 5 Resetting the language
- 15 - 6 Resetting the unit to its factory defaults.
- 15 - 7 Formatting microSD cards
- 15 - 8 Using the automatic power saving function
- 15 - 9 Selecting the power source
- 15 - 10 Setting the AA battery type (BATTERY)
- 15 - 11 Power saving (energy conservation) mode
- 15 - 12 Adjusting the display contrast (CONTRAST)
- 15 - 13 MENU
- 16 - Messages
- 17 - Troubleshooting
- 18 - Specifications