Instructions for the installer, Technical data, Installing the appliance transportation, unpacking – Electrolux ENB 38607 X User Manual

Page 25: Cleaning, Location

Advertising
background image

electrolux 25

GB

Instructions for the Installer

Technical data

Model

Gross capacity (l)

Net capacity (l)

Width (mm)

Height (mm)

Depth (mm)

Energy consumption (kWh/24h)

(kWh/year)

Energy class, according to EU standards

Freezing capacity (kg/24h)

Rising time (h)

Rated current (A)

Noise Lc (dB)

Weight (kg)

Number of compressors

ENB 38607 W

ENB 38607 W8

ENB 38607 X

Refrigerator: 291

Freezer: 91

Refrigerator: 285

Freezer: 78

595

2010

632

1,026

374

A

10

18

0,7

42

74

1

Installing the appliance

Transportation, unpacking

The appliance and the interior fittings are
protected for transport.

Remove all packaging and any
adhesive tape.

Any remnants of adhesive can be
removed using white spirit.

After transportation the appliance
must not be switched on for 2 hours.
This is to allow the refrigerant to settle.

Cleaning

Clean the accessories and the inside of
the appliance with warm water and
bicarbonate of soda (5 ml
to 0.5 litres of water). Rinse and dry
thoroughly.

Do not use detergents, abrasive
powders, highly perfumed cleaning
products, wax polishes or cleaning
products containing bleach or alcohol.

Location

The appliance should be positioned in a
well ventilated, dry room.

Energy use is affected by the ambient
temperature.

The appliance should therefore:

not be installed next to radiators,
cookers or other sources of heat

only be installed at a location where
the ambient temperature corresponds
to the climate classification, for which
the appliance is designed.

Advertising
This manual is related to the following products: