Emerson Process Management Bristol ControlWave CW_30 - Manual (Page 3)

Product Data Document
420DS-0d
July 16, 2007 - Page 3
Bristol ® ControlWave ® Micro Enclosures
Remote Automation Solutions
Website: www.EmersonProcess.com/Remote
Features
High Speed processor
Very low power consumption minimizes power
supply, solar and battery backup requirements
Worldwide standard IEC 61131-3 programming
with ACCOL 3
Multiple protocol support BSAP, Modbus, DNP3,
DF1 & CIP
Built-in 100 Mbps Ethernet port
Up to eleven serial communication ports
Built-in Modem and Radio options
On-board Alarm & Historical database ensures
highest data integrity
Built-in FTP server
Wide temperature range (-40 to +70ºC)
Industry Standard Programmability
Engineers will appreciate the ControlWave Designer
with ACCOL III programming software. Its confor-
mance to the IEC61131-3 programming standard
enables them to quickly start projects, re-use exist-
ing code and simplify maintenance in the long term.
All five IEC languages are supported, as well as
multitasking of up to 100 simultaneous programs.
•
•
•
•
•
•
•
•
•
•
In addition to the basic functions and function
blocks, ControlWave Designer brings the benefit
of over twenty years of SCADA and plant control
experience in Emerson’s Bristol ACCOL III function
block library. ACCOL III empowers the programmer
with over sixty ready-to-use process control function
blocks valuable for use in oil & gas, water & waste
and process measurement & control applications.
ControlWave also provides local historical data stor-
age and alarming with time stamps to ensure the
integrity of all data in the event of an interruption in
network communication.
ControlWave has been designed around open
standards to enable the engineer to employ famil-
iar technologies to maximize system flexibility and
expansion. With Emerson’s Bristol OpenBSI ( Open
Bristol System Interface) communications interface
and Active X controls you can even build a local
HMI or use the OPC Server to provide data to any
OPC compliant PC based HMI.
ControlWave Micro conveniently combines the
speed of a PLC, the programming power of a DCS,
the low current consumption and flexible communi-
cations of an RTU. ControlWave Micro is truly the
most versatile and cost effective SCADA and control
system available.
Visit www.controlwave.com for model ordering
information and enclosure drawings.