EAW Cinema Electronic Crossover CX300 - Manual

S o u n d i s H a l f t h e P i c t u r e
EAW products are continually improved. All specifications are therefore subject to change without notice.
1 5
The new CX300 brings EAW’s Close Coupling™ to cinema applications with a line of
dedicated cinema Close Coupled Electronic Crossovers™. The CX300 must be factory-
configured to control a specific EAW cinema screen channel system.
Rather than develop generic crossover settings that provide substandard system
integration, EAW tightly aligns (Close Couples™) each crossover configuration to the
specific loudspeaker it controls. These cost effective, single rack space, analog electronic
crossovers are designed for use in biamplified or triamplified applications.
The CX300 Close Coupled Electronic Crossover is available as a three-channel
configuration, so a single device will provide crossover, equalization, and time-offset
functions for a Left, Center, and Right (3-channel) cinema system.
Each model comes preconfigured from the factory. This removes the burden of “setting
up” from the end user and assures optimum system performance of every bi or triamplified
EAW Cinema screen channel loudspeaker system. Go to the CX300 Crossover Selector Chart
to determine the appropriate CX300 configuration for your screen channel loudspeakers.
C I N E M A S Y S T E M S C X 3 0 0 C L O S E C O U P L E D ™ C I N E M A P R O C E S S O R
CX300 Configuration Loudspeaker Controlled
CX300-CB152 CB152
CX300-CB259 CB259
CX300-CB2591 CB2591
CX300-CB153 CB153
CX300-CB423M CB423M
CX300-CB423MX CB423MX
CX300-CB523M CB523M
CX300-CB523MX CB523MX
CX300-CSC723 CSC723
CX300-CS723X CS723X
CX300-CSC923 CSC923
CX300-CSC923X CSC923X