Denon AVR-A1H 15.4-Channel Network A/V Receiver - Manual (Page 246)

Distances
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each
speaker.
o Unit
Set the unit of distance.
Feet (Default)
Meters
o Step
Set the minimum variable width of the distance.
1 ft / 0.1 ft (Default: 1 ft)
0.1 m / 0.01 m
o Set the distance
0.0 ft – 59.1 ft / 0.00 m – 18.00 m
0
The speakers that can be selected differ depending on the “Amp Assign” and
“Speaker Configuration” settings. (“Amp Assign” ( v p. 224), “Speaker
Configuration” ( v p. 237))
0
Default settings:
Front L / Front R / Front Height L / Front Height R / Center / Front Wide L /
Front Wide R / Front Dolby L / Front Dolby R / Subwoofer 1 / Subwoofer 2 /
Subwoofer 3 / Subwoofer 4: 11.8 ft (3.60 m)
Speakers other than the above: 9.8 ft (3.00 m)
0
Set the difference in the distance between the speakers to less than 19.7 ft
(6.00 m).
Contents Connections Playback Settings Tips Appendix
246
Front panel Display Rear panel Remote Index