Datalogic™ magellan® aux port, Wincor nixdorf terminal, Wincor nixdorf beetle™ terminal – Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner User Manual
Page 35: Datalogic™ magellan, Aux port
Granit XP User Guide
19
Datalogic™ Magellan
®
Aux Port
Scan the following Plug and Play code to program the scanner for a Datalogic
Magellan auxiliary port configuration. This barcode sets the baud rate to 9600 bps
and the data format to 8 data bits, no parity, 1 stop bit.
Wincor Nixdorf Terminal
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf
terminal. This barcode sets the baud rate to 9600 bps and the data format to 8 data
bits, no parity, 1 stop bit.
Wincor Nixdorf Beetle™ Terminal
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf
Beetle terminal. The following prefixes are programmed for each symbology:
Datalogic Magellan Settings
Wincor Nixdorf Terminal Settings
Symbology
Prefix
Symbology
Prefix
Aztec Code
V
Interleaved 2 of 5
I
Codabar
N
MaxiCode
T
Code 93
L
MicroPDF417
S
Code 128
K
PDF417
Q
Data Matrix
R
QR Code
U
EAN-8
B
Straight 2 of 5 IATA
H
EAN-13
A
UPC-A
A0
GS1 DataBar
E
UPC-E
C
GS1-128
P
All other barcodes
M
Wincor Nixdorf Beetle Settings