Epson A881381 - Manual (Page 5)

14. Do not allow anything to rest on the power cord. Do not place a cord
where it may be stepped on.
15. Do not replace the video interface cable with a non-shielded cable.
16. Unplug the monitor from the computer and the wall outlet before
cleaning. Use a damp cloth for cleaning.
17. Excessive brightness for long periods may permanently imprint an image
on the screen.
18. To avoid picture distortion or color disturbance, do not put devices that
generate magnetism (such as telephones, televisions, speakers, or
magnetic screwdrivers) near the monitor.
19. When the monitor will not be used for a long period of time, turn it off
by pressing the power button. (Always wait at least five seconds before
you turn it back on.)
20. Unplug the monitor from the computer and the wall outlet and refer
servicing to authorized service personnel under the following
conditions:
A. If the power cord or plug is damaged.
B. If the monitor has come into contact with any liquids, such as rain or
spills.
C. If the monitor does not operate normally when the operating
instructions are followed. Adjust only those controls that are
covered by the operating instructions; improper adjustment of
other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to
normal operation.
D. If the monitor has been dropped or the cabinet or glass faceplate has
been damaged.
E. If the monitor exhibits a distinct change in performance.
i v