Emerson Radio CKD2330 - Manual (Page 11)

1 0
AC Plug
AC Outlet
POWER SOURCE
This radio is designed to operate on 120V 60Hz AC only. Attempting to operate
this radio on any other power source could cause damage to the unit and such
damage is not covered by your warranty.
Make sure the radio is connected to an AC outlet that is always “live”. Do not
connect the radio to an outlet that is controlled by a wall switch.
NOTE: This unit has a polarized AC plug with one wide blade and one narrow
blade. This plug will only fit into a matching polarized AC outlet. This is a safety
feature to reduce the possibility of electric shock. If this plug will not fit in your AC
outlet, you probably have an outdated non-polarized outlet. You should have your
outdated outlet changed by a qualified, licensed electrician. Do not file the wide
blade on the plug, or use an adapter to make the plug fit into your outlet. This
defeats the safety feature and could expose you to electric shock.
CKD2328_2330_B091103.p65 11/9/2003, 14:51 10