Elinchrom Hooded Diffusers - Manual (Page 2)

Fitting of Hooded Front Diffusers for Rotalux Softboxes
1. Assemble the softbox
without the front Diffuser and
place it on a floor or table.
2. Lay the Hooded Diffuser
over the softbox.
3. Pull the capped end of the
rod from the corner pocket of
the softbox.
4. Locate the Velcro™ strip in the corner of the
cover and push the capped end of the rod all
the way through.
5. Replace the capped end of the rod
into the corner pocket and fold the
cover over the corner of the softbox.
Please Note: The same technique is used to fit the Square, Rectangular,
Octagonal and the Rotagrid Diffuser.
English
©2010 Elinchrom S.A. (LTD) switzerland www.elinchrom.com