Eiki LC-SX6A - Manual (Page 25)

25
Basic Oper
ation
Basic Operation
Operating the Projector
You can operate the projector with the projector's top control, the remote control or a USB mouse (not provided). he remote
control can be used wireless or wired.
Operational range of the wireless remote control is within about 32.8' (10m) from the projector. Operational range differs
depending on environments where the projector is used. Any obstruction to air signal between the projector and the remote
control may prevent the remote control from working properly.
The wireless remote control does not work
when the wired remote cable is connected
to either the projector or the remote
control. Remove the wired remote cable
from both of the projector and the remote
control when using it as wireless.
Wireless Remote Control Operation
Projector Top Control Operation
Mouse Operation
Connect the R/C JACK on the projector and the remote
control with the wired remote cable when operating
the remote control as wired.
Connect the USB terminal on the projector and a USB
mouse when operating the projector's menu with the
USB mouse. A mouse cursor appears on the screen
with the mouse connected.
Mouse operation offers the On-Screen Menu control
only. Other operations are unavailable with the USB
mouse. For details of the mouse operation, refer to
pages 33~34.
Wired Remote Control Operation
R/C jack
Wired Remote Cable
(not provided)
USB terminal