Operating instructions – Euro-Pro EUROPRO VPW41H User Manual

Page 5

Advertising
background image

Using the High Pressure lance

The high pressure lance may be used

alone or with the detergent applicator

bottle.

Add detergent to the bottle and then

attach the detergent applicator bottle to

the high pressure lance, just push it on

the end of the high pressure lance.

(Fig. 6 & 7) To remove the detergent

applicator bottle, lift the tab on the top

of the connector and pull off.

Fig. 5

Safety

Lock

Fig. 6

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

GETTING TO KNOW YOUR PRESSURE WASHER

CAUTION

Lubrication: The pressure washer is

supplied with a closed lubrication

system, so no addition of oil is needed.
Checking the Water Intake Filter: The

water intake filter is located inside the

water intake connector. (Fig. 8)

Remove periodically and inspect for

any deposits that might accumulate

there.

Fig. 8

Hose Connector

Water Intake

Maintenance & Cleaning

When you wish to stop using the

pressure washer temporarily, make

sure that the safety lock has been

engaged to avoid any accidental

operation. (Fig. 5)

Cleaning the Nozzles: If you notice that

the output pressure fluctuates, you may

have to clean the nozzles. Turn the unit

"Off". Unplug from electric outlet and

disconnect the water supply. Remove

the lance and hose with the trigger gun

from unit. Take the small metal pin

provided and insert into the nozzle end

to remove any obstructions. (Fig. 9)

Fig. 9

This will occur more frequently if your

water supply is very hard.

CAUTION

1. Pressure Washer
2. On/Off Switch
3. High Pressure Water Output
4. Handle
5. Water Intake With Filter
6. Wheels (x2)
7. High Pressure Lance
8. Brush

9.

Trigger Gun

10. Safety Lock
11. Trigger
12. High Pressure Hose
13. High Pressure Hose Connector
14. Detergent Applicator Bottle
15. Garden Hose Coupling

When using your pressure washer,

always have it in the horizontal

position as shown below.

NEVER

have it in the upright position.

Fig. 7

Illustrations may differ from actual product.

Technical Specifications

Voltage:

120V., 60Hz.

Power:

12.5 Amps.

Pressure:

1450 psi. (max)

Flow Rate:

1.45 gpm

6

3

Advertising