Epson 5000 - Manual (Page 131)

Load single-sheet multi-part forms only into the front
slot.
Use only carbonless multi-part forms.
Continuous paper:
Width 101 to 254 mm (4 to 10 inches)
Copies Four sheets (one original plus up to
three copies)
Thickness 0.065 to 0.10 mm (0.0025 to 0.0039 inches)
for one sheet
0.065 to 0.32 mm (0.0025 to 0.012 inches) total
Weight 52.3 to 82 g/m 2 (14 to 22lb) for one sheet
40 to 58 g/m 2 (12 to 15 lb) per sheet in
multi-part forms
Use only carbonless multi-part forms.
Note:
You can use recycled paper with this printer; however, you may notice
increases in ribbon consumption and paper jamming. If this occurs,
use a higher grade of paper.
Labels
Size 63.5 x 23.8 mm (2 ½ x 15/16 inches)
101 x 23.8 mm (4 x 15/16 inches)
101 x 27 mm (4 x 17/16 inches)
Thickness 0.07 to 0.09 mm (0.0028 to 0.0031 inches)
for backing sheet
0.16 to 0.19 mm (0.0063 to 0.0075 inches) total
Use continuous type labels only,
Use labels only under normal temperature and
humidity conditions.
Technical Specifications 7-5