Electrolux LAVAMAT 50550 - Manual (Page 18)

Instructions for use
18
Performing a Wash Cycle
Brief guide
A wash cycle consists of the following steps:
1. Open the door and load the washing.
2. Close the door.
3. Add detergent/additives.
4. Set the appropriate wash programme:
– Set the programme and temperature using the programme knob
– Set additional programme functions as required.
5. Change the Spin Speed/press RINSE HOLD (ARRET CUVE PLEINE, SPOEL-
STOP) as necessary.
6. Start the wash programme by pressing the START/PAUSE (MARCHE/
PAUSE, START/PAUZE) button.
After the wash programme is complete:
Important! If the wash cycle was stopped with Rinse Hold, select
DRAIN (VIDANGE/POMPEN) or SPIN (ESSORAGE/CENTRIFUG.) before
opening the door.
7. Open the door and take out the washing.
The door can be opened after the DOOR (PORTE/DEUR) light goes off
and the END (FIN/ENDE) light has come on.
8. Switch off the washing machine: Turn the programme knob to OFF
(ARRET/UIT).