RCF EJ8 Active 12" 2-Way 1400W Portable Line Array PA System (Black) - Manual (Page 9)

9
ENGLISH
11 POWER switch
Push it to turn ON / OFF the amplifier.
Before switching the amplifier on, check all the connections and turn fully
counterclockwise (–
∞ ) the volume control 4 .
12 VDE inlet.
100-120V~ T 6.3 A L 250V
220-240V~ T 3.15 A L 250V
Before connecting the power cord, check if the A/C power corresponds to the voltage
indicated on the rating plate on the unit, if not, please contact your RCF dealer.
Connect the power cord only to a A/C power socket outlet with a protective earthing
connection.
When replacing the fuse, refer to the silkscreen indications.
WARNING : the VDE Power Connector is used to disconnect the system from the power
supply network. It must be easily accessible after the installation and during the use of
the system.
ON
11 12