EverFocus EDSR 400F - Manual (Page 45)

E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
Connections:
The Data Control cables connect to the back of the EDSR using the RS 485 Port.
Depending on how your connections are setup and the number of cameras you are using, you
will need to connect the data cables to Pins 3 and 6 on any of the 2 RS-485 ports. Pin 3 being
Positive (+) and pin 6 being negative (-).
An Ethernet cable can be used in the RS485
port, as long as the wires for pin 3 and 6 are
used. Looking at the top of an Ethernet cable,
(flat edge) the wires that are used will be White-
Green (3
rd ) and Green (6 th ) on the DVR.
Diagram 23
40