Envision Peripherals WebCam - Manual (Page 14)

ADVANCED FEATURES – Settings Tab – Continued
•
Image Mirror – Changes into mirror image.
•
Image Flip – Turns the image upside down.
•
Low Light – Optimizes the image in low-light situations
•
In/Out Door – Optimizes the image for indoor or outdoor lighting.
•
USB Bandwidth – Decreasing the value will leave more bandwidth for
other USB devices, but will slow down frame rate. Leaving the Auto box
checked is recommended.
•
Exposure – Adjusts the exposure time of the image sensor. Increasing
exposure will slow down frame rate. Leaving the Auto box checked is
recommended.
•
White Balance – Increase/decrease the amount of Red color and
increase/decrease the amount of Blue color in the image for manual white
balance adjustment. Leaving the Auto box checked is recommended.
•
Flicker – Helps to reduce image flicker when V-Cam is used under
fluorescent lighting. Select the value that most closely matches your local
electrical AC frequency. For North America, choose 60Hz.
•
Backlight Comp. – Check this box to enable backlight compensation in
situations where there is strong light in the background, such as when
there is a sun-lit window behind you.
•
B/W Mode – Check this box to set the image in black and white mode.
•
Auto LED Mode – Changing these settings will have no effect since this
particular webcam model does not have LED functions.
•
Default – Click on this button to restore all values in the Settings tab to
default factory settings.
•
Save – Saves the current settings to the camera. Previously saved settings
will be overwritten.
•
Load – Loads the most recently saved settings.
13
E
n
g
lis
h