Euphonix MC Mix - Manual (Page 29)

professional control surfaces
Artist Series
EuCon APPLICATION SETUP GUIDE
PRO TOOLS (HUI)
29
7. Select 8 from the Ch # drop-down menu as the number of channels for each
controller.
8. Press OK.
Pro Tools updates the channel and track information and transmits that to
the Artist devices.
Your Artist device should now be controlling Pro Tools. If not:
• Make sure Pro Tools is the front-most application (i.e., the one receiving
keystrokes and mouse clicks). The Artist devices control only the front-most
application.
• Check that all steps in Setting up EuCon to Control Pro Tools on page 25 and
in this section have been performed correctly, and reboot your Mac.