Emprex Network Device DVDRW 2016UI - Manual (Page 12)

8
OPERATION & CONNECTION
Front Panel
1. LED Indicator (Green color)
Flashes “green” while verifying, reading or Writing discs.
2. Disc Tray
Place the disc in the tray, and then press the Close/Eject button or lightly
push the tray to close it.
3. Emergency Eject Hole
If the Close/Eject button doesn’t work properly and the disc tray can’t be
opened, you can insert a paper clip or a small rod into this hole for
manual ejection.
Please make sure to power off the system before you do that.
4. Close/Eject button
This button is used to open and close the disc tray. If the tray is closed,
pressing the button will eject it.
+ Note: The design of front panel is subject to change without notice.