Epson 80211b - Manual (Page 53)

49
Appendix A:
Configuration Settings
The Wireless Server Configuration screen includes both fields that display
information and fields that allow you to modify print server settings. Since
most of the settings are configured automatically based on your existing
network, you don’t need to change these settings for the typical wireless
network. Some settings, such as the Server Name or Password, you may want
to change for convenience or security.
If you contact EPSON for technical support, you need to provide
configuration information such as the serial number and firmware revision.
Following are definitions of the configuration settings:
Server Name
Name that identifies the print server (and its printer) on your wireless
network. The default is
EAI_xxxxxx (where xxxxxx are the last six digits of
the MAC/Ethernet address). Choose any name that makes it easier for users
to identify the printer (for example,
Admissions Printer ). You can enter
from one to 32 characters in this field. Make sure you follow the naming
practices for your organization.
Serial Number
Unique number that identifies each EpsonNet 802.11b Wireless Print Server
that is produced. This number is set during manufacture and cannot be
changed.
Password
Used to restrict access to the Wireless Server Configuration screen. The
default password is null (blank). The maximum number of characters you
can use in this field is 16.
ZLUHOHVVVHUYHUERRN 3DJH  )ULGD\ 0D\     30